I am about to install Netbackup 7.5. on my Win 2K3 SP2 32 bit master server. The patch requirements do not mention Win 2k3, only Win 2008. I am aware that Win 2K3 EOL is within the next month, so there is a project scheduled to refresh the server. Does tis mean that I have to wait until the server is refreshed to 2008 before i can upgrade Netbackup ?
Hello,
I have a NetBackup master server with version 7.5.0.7 on linux host. And I've installed a NetBackup Java Admin Console with version 7.0 on windows host. When I try to connect to my master server I get an error:
How can I update my Java Admin Console to version 7.5.0.7?
Hi team,
I want to configure four different media pools for daily /weekly/monthly backups and one scratch pool. The backup will run on disk only (MSDP backup).
once the retention gets over of any backup, the media should move to scratch pool.
Please suggest
Hello,
I've a strange issue with the bpclimagelist command.
If I don't put the "-s" attribute in my command line, it's simply don't work.
So, to sum up:
/usr/openv/netbackup/bin/bpclimagelist don't work.
/usr/openv/netbackup/bin/bpclimagelist -U -s 04/10/2015 works perfectly.
I run the command under a linux RHEL 6.6 and my Netbackup version is NetBackup-RedHat2.6.18 7.5.0.4.
I upgraded to Backup Exec 15 about a week ago. Everything has been running smoothly until last night. Two of the backups started and just sat at Active: Running - Backup, but only list 0 bytes. When I try to cancel the jobs they just hang there and I have to reboot the server for them to fully cancel. When I try to backup any of the servers that Backup Exec normally backs up the same problem occurs on any of them. Job logs show no errors, they just basically stop once it gets to a certain point. Has anyone else been experiencing this? Our other site is running Backup Exec 15 with no issues.
Hello,
I need to create a report that shows the percentage of successful and failed jobs that have occurred in the month. This is possible?
thanks
Hey,
I'm backing up virtual machine's (CentOs) VMDK file from our VMWare vCenter. Everything else seems to be working fine, but the dublicate job to tape keeps giving me the following error:
Job ended: Saturday, April 18, 2015 at 9:06:42 AM
Completed status: Failed
Final error: 0xa0009683 - Unable to load the necessary boot configuration files. Backups that were enabled for Granular Recovery Technology may not be available for restore.
Final error category: Resource Errors
For additional information regarding this error refer to link V-79-40960-38531
The link mentioned above leads to empty search result page: https://support.symantec.com/en_US/search-result.html
What could be the cause for this problem? Same backup routine works fine for Windows virtual machines. I also have seperated VMDK- backup jobs to two different jobs, one for Windows machines and one for CentOS machines.
I'm running Backup Exec 2014 version 14.1 Rev. 1786 (64-bit).
Niko Turunen
Hi everybody,
i have a strange problem with a new HP Tape Library.
We got a new netapp filer "netapp03" and configured fc zoning, so the old and new library is visible at the filer. sysconfig -m/-t are showing changer and tape devices.
The HP MSL2024 G3 Series with LTO5 is the old one. The HP MSL2024 LTO6 is new.
The problem is, the HP Ultrium6 Device is not under the HP MSL2024 LTO6 Changer ??
Am I missing something, some mistakes in FC Zoning ? Any hints are welcome.
regards Daniel
Hi,
my trial license expired and i want to go back to BackupExec 2014. Is there any way to downgrade?
Thanks and regards,
Dave
hi ;
currently i configured oracle intelleigent policy for full backup database , and the following error occur :
1: (25) cannot connect on socket
My design as follow :
1- Netbackup /master server "netbackup" : 200.200.200.5
private netwrok for backup "netbackup-bck": 192.168.1.200
2- DB server "dbserver" / media server: 200.200.200.183
private netwrok for backup "dbserver-bck" : 192.168.1.70
bp.conf at master :
root@netbackup # cat /usr/openv/netbackup/bp.conf
SERVER = netbackup
CLIENT_NAME = netbackup-bck
MEDIA_SERVER = netbackup-bck
SERVER = netbackup-bck
SERVER = dbserver-bck
CONNECT_OPTIONS = localhost 0 0 2
USE_VXSS = PROHIBITED
VXSS_SERVICE_TYPE = INTEGRITYANDCONFIDENTIALITY
EMMSERVER = netbackup-bck
HOST_CACHE_TTL = 3600
VXDBMS_NB_DATA = /usr/openv/db/data
OPS_CENTER_SERVER_NAME = netbackup
JOB_PRIORITY = 0 0 90000 90000 90000 90000 85000 85000 80000 80000 80000 80000 75000 75000 70000 70000 50000 50000 45000 0 0 0 0 0
BPDBM_VERBOSE = 2
BPRD_VERBOSE = 2
BPBRM_VERBOSE = 1
BPTM_VERBOSE = 1
BPDM_VERBOSE = 1
BPJOBD_VERBOSE = 1
TELEMETRY_UPLOAD = NO
bp.conf at DB Server :
SERVER = netbackup-bck
SERVER = dbserver-bck
CLIENT_NAME = dbserver-bck
CONNECT_OPTIONS = localhost 1 0 2
USE_VXSS = PROHIBITED
VXSS_SERVICE_TYPE = INTEGRITYANDCONFIDENTIALITY
EMMSERVER = netbackup-bck
HOST_CACHE_TTL = 3600
BPBRM_VERBOSE = 1
BPTM_VERBOSE = 1
BPDM_VERBOSE = 1
TELEMETRY_UPLOAD = YES
job log :
----------
04/22/2015 14:25:15 - Info nbjm (pid=1517) starting backup job (jobid=135) for client netbackup, policy test_DB_policy, schedule Full-disk
04/22/2015 14:25:15 - Info nbjm (pid=1517) requesting MEDIA_SERVER_ONLY resources from RB for backup job (jobid=135, request id:{A1838E92-E8EA-11E4-A092-00144F268829})
04/22/2015 14:25:15 - requesting resource test-standalone
04/22/2015 14:25:15 - requesting resource netbackup.NBU_CLIENT.MAXJOBS.netbackup
04/22/2015 14:25:15 - granted resource netbackup.NBU_CLIENT.MAXJOBS.netbackup
04/22/2015 14:25:16 - estimated 0 kbytes needed
04/22/2015 14:25:16 - begin Parent Job
04/22/2015 14:25:16 - begin Application Resolver: Start Notify Script
04/22/2015 14:25:16 - Info RUNCMD (pid=3321) started
04/22/2015 14:25:16 - Info RUNCMD (pid=3321) exiting with status: 0
Operation Status: 0
04/22/2015 14:25:16 - end Application Resolver: Start Notify Script; elapsed time 0:00:00
04/22/2015 14:25:16 - begin Application Resolver: Step By Condition
Operation Status: 0
04/22/2015 14:25:16 - end Application Resolver: Step By Condition; elapsed time 0:00:00
04/22/2015 14:25:16 - begin Application Resolver: Resolver Discovery
Operation Status: 25
04/22/2015 14:25:16 - end Application Resolver: Resolver Discovery; elapsed time 0:00:00
04/22/2015 14:25:16 - begin Application Resolver: Stop On Error
Operation Status: 0
04/22/2015 14:25:16 - end Application Resolver: Stop On Error; elapsed time 0:00:00
04/22/2015 14:25:16 - begin Application Resolver: End Notify Script
04/22/2015 14:25:16 - Info RUNCMD (pid=3328) started
04/22/2015 14:25:16 - Info RUNCMD (pid=3328) exiting with status: 0
Operation Status: 0
04/22/2015 14:25:16 - end Application Resolver: End Notify Script; elapsed time 0:00:00
Operation Status: 25
04/22/2015 14:25:16 - end Parent Job; elapsed time 0:00:00
cannot connect on socket (25)
bprd log : /usr/openv/netbackup/logs/bprd/log.042215
-----------------------------------------------------------------------------------
14:25:15.710 [1498] <2> bprd: socket fd from accept() is 10
14:25:15.713 [1498] <2> listen_loop: request complete
14:25:15.722 [3313] <2> logconnections: BPRD ACCEPT FROM 200.200.200.5.47634 TO 200.200.200.5.13720 fd = 10
14:25:15.724 [3313] <2> process_request: setsockopt SO_LINGER on 10 succeeded.
14:25:15.726 [3313] <2> connected_peer: Connection from host netbackup, 200.200.200.5, on non-reserved port 47634
14:25:15.728 [3313] <2> process_request: command C_BPBACKUP_7_6 (176) received
14:25:15.728 [3313] <2> process_request: immediate backup request = 329199 176 root root NONE netbackup netbackup-bck NONE test_DB_policy Full-disk 0 NONE 0 4 0 en_US en_US en_US en_US en_US 0 0 -1 0 0 0 0
14:25:15.728 [3313] <2> process_request: After V_sscanf of bufr
14:25:15.728 [3313] <2> process_request: clnt = NONE
14:25:15.728 [3313] <2> process_request: clnthostname = netbackup
14:25:15.728 [3313] <2> process_request: clnt_bp_conf_name = netbackup-bck
14:25:15.728 [3313] <2> process_request: keyword =
14:25:15.728 [3313] <2> process_request: After get_client_and_host_names
14:25:15.728 [3313] <2> process_request: clnt_bp_conf_name = netbackup-bck
14:25:15.728 [3313] <2> process_request: clnt = NONE
14:25:15.728 [3313] <2> process_request: target_hostname = NONE
14:25:15.728 [3313] <2> process_request: retval = 0
14:25:15.728 [3313] <2> process_request: Before bkarfiles
14:25:15.728 [3313] <2> bkarfiles: backup_or_archive = 1
14:25:15.728 [3313] <2> bkarfiles: immediate_or_userdirected = 1
14:25:15.728 [3313] <2> bkarfiles: client = NONE
14:25:15.728 [3313] <2> bkarfiles: client_hostname = NONE
14:25:15.728 [3313] <2> bkarfiles: requesting_user = root
14:25:15.729 [3313] <2> bkarfiles: requesting_group = root
14:25:15.729 [3313] <2> bkarfiles: progress_file = NONE
14:25:15.729 [3313] <2> bkarfiles: policy = test_DB_policy
14:25:15.729 [3313] <2> bkarfiles: sched = Full-disk
14:25:15.729 [3313] <2> bkarfiles: keyword =
14:25:15.729 [3313] <2> bkarfiles: component = NONE
14:25:15.729 [3313] <2> bkarfiles: user_interface = 0
14:25:15.729 [3313] <2> bkarfiles: monitor_backup_job = 0
14:25:15.729 [3313] <2> bkarfiles: backup_jobidstr = NONE
14:25:15.729 [3313] <2> bkarfiles: client_locales_present = 0
14:25:15.729 [3313] <2> bkarfiles: bkup_lc_messages = en_US
14:25:15.729 [3313] <2> bkarfiles: bkup_lc_time = en_US
14:25:15.729 [3313] <2> bkarfiles: bkup_lc_ctype = en_US
14:25:15.729 [3313] <2> bkarfiles: bkup_lc_collate = en_US
14:25:15.729 [3313] <2> bkarfiles: bkup_lc_numeric = en_US
14:25:15.729 [3313] <2> bkarfiles: bkup_with_non_rsvd_ports = 16974338
14:25:15.729 [3313] <2> bkarfiles: client_type = 4
14:25:15.729 [3313] <2> bkarfiles: cverbose = 0
14:25:15.729 [3313] <2> bkarfiles: acknowledge_list = 0
14:25:15.729 [3313] <2> bkarfiles: proxy_copy = 0
14:25:15.729 [3313] <2> bkarfiles: generate_english_logs = 0
14:25:15.729 [3313] <2> bkarfiles: sync_keep_alive = 0
14:25:15.729 [3313] <2> bkarfiles: cbustart = 0
14:25:15.729 [3313] <2> bkarfiles: cbuend = 0
14:25:15.729 [3313] <2> get_next_file_path: received string: /
14:25:15.730 [3313] <2> get_next_file_path: received string: CONTINUE
14:25:16.736 [3313] <4> msgbackup: sent start request to nbpem
14:25:16.736 [3313] <2> bkarfiles: EXIT STATUS = 0
14:25:16.736 [3313] <2> process_request: After bkarfiles(2)
14:25:16.736 [3313] <2> process_request: EXIT STATUS 0
14:25:16.740 [3313] <2> bprd: /usr/openv/netbackup/bin/userreq_notify manual_backup NONE root
14:25:16.823 [1498] <2> listen_loop: do_schild = 1
14:25:16.823 [1498] <2> childterm: pid=3313 exit=0, signo=0 core=no
14:25:16.823 [1498] <2> schild: wait2() ECHILD
14:25:20.388 [1498] <2> bprd: socket fd from accept() is 10
14:25:20.391 [1498] <2> listen_loop: request complete
14:25:20.400 [3352] <2> logconnections: BPRD ACCEPT FROM 200.200.200.5.47640 TO 200.200.200.5.13720 fd = 10
14:25:20.402 [3352] <2> process_request: setsockopt SO_LINGER on 10 succeeded.
14:25:20.404 [3352] <2> connected_peer: Connection from host netbackup, 200.200.200.5, on non-reserved port 47640
14:25:20.406 [3352] <2> process_request: command C_LIKELY_DATE_3_0 (59) received
14:25:20.406 [3352] <2> process_request: likelydate request = 329199 59 netbackup-bck netbackup netbackup-bck NONE 0 12 1414157120 1429709120 en_US en_US en_US en_US en_US 0 0 0 0 0 0 0 0
14:25:20.411 [3352] <2> db_getCLIENT_by_hostname: accessing client /usr/openv/netbackup/db/client/dataguard-bck
14:25:20.412 [3352] <2> db_getCLIENT_by_hostname: hostname netbackup not configured for client dataguard-bck
14:25:20.412 [3352] <2> db_getCLIENT_by_hostname: accessing client /usr/openv/netbackup/db/client/netbackup
14:25:20.412 [3352] <2> db_getCLIENT_by_hostname: hostname netbackup not configured for client netbackup
14:25:20.412 [3352] <2> ConnectionCache::connectAndCache: Acquiring new connection for host netbackup, query type 83
14:25:20.413 [3352] <2> logconnections: BPDBM CONNECT FROM 200.200.200.5.47641 TO 200.200.200.5.13721 fd = 6
14:25:20.533 [3352] <2> db_getIMAGE: db_IMAGEreceive: no entity was found 227
14:25:20.534 [3352] <2> imagelikely: db_getIMAGE() failed: no entity was found
14:25:20.534 [3352] <2> process_request: imagelikely failed - EC status = no entity was found
14:25:20.534 [3352] <2> process_request: EXIT STATUS 227
14:25:20.534 [3352] <2> bprd: /usr/openv/netbackup/bin/userreq_notify image_list netbackup-bck unknown
14:25:20.614 [1498] <2> listen_loop: do_schild = 1
14:25:20.614 [1498] <2> childterm: pid=3352 exit=227, signo=0 core=no
14:25:20.614 [1498] <2> schild: wait2() ECHILD
14:25:21.310 [1498] <2> bprd: socket fd from accept() is 10
14:25:21.312 [1498] <2> listen_loop: request complete
14:25:21.320 [3361] <2> logconnections: BPRD ACCEPT FROM 200.200.200.5.47642 TO 200.200.200.5.13720 fd = 10
14:25:21.322 [3361] <2> process_request: setsockopt SO_LINGER on 10 succeeded.
14:25:21.324 [3361] <2> connected_peer: Connection from host netbackup, 200.200.200.5, on non-reserved port 47642
14:25:21.325 [3361] <2> process_request: command C_IMAGE_LIST_4_5 (81) received
14:25:21.325 [3361] <2> process_request: imagelist request = 329199 81 netbackup-bck netbackup netbackup-bck NONE 0 12 90000 1429826399 en_US en_US en_US en_US en_US 8 0 0 0 512 0 0 0
14:25:21.327 [3361] <2> db_getCLIENT_by_hostname: accessing client /usr/openv/netbackup/db/client/dataguard-bck
14:25:21.328 [3361] <2> db_getCLIENT_by_hostname: hostname netbackup not configured for client dataguard-bck
14:25:21.328 [3361] <2> db_getCLIENT_by_hostname: accessing client /usr/openv/netbackup/db/client/netbackup
14:25:21.328 [3361] <2> db_getCLIENT_by_hostname: hostname netbackup not configured for client netbackup
14:25:21.328 [3361] <2> ConnectionCache::connectAndCache: Acquiring new connection for host netbackup, query type 76
14:25:21.329 [3361] <2> logconnections: BPDBM CONNECT FROM 200.200.200.5.47643 TO 200.200.200.5.13721 fd = 6
14:25:21.437 [3361] <8> imagelist: db_IMAGEreceive failed: no entity was found (227)
14:25:21.437 [3361] <2> process_request: imagelist failed - EC status = no entity was found
14:25:21.438 [3361] <2> process_request: EXIT STATUS 227
14:25:21.438 [3361] <2> bprd: /usr/openv/netbackup/bin/userreq_notify image_list netbackup-bck unknown
14:25:21.519 [1498] <2> listen_loop: do_schild = 1
14:25:21.519 [1498] <2> childterm: pid=3361 exit=227, signo=0 core=no
14:25:21.519 [1498] <2> schild: wait2() ECHILD
14:26:24.527 [1498] <2> get_behavior_rec: ?
14:26:24.527 [1498] <2> get_behavior_rec: MD5 digest line
14:26:24.527 [1498] <2> ConnectionCache::connectAndCache: Acquiring new connection for host netbackup, query type 98
14:26:24.528 [1498] <2> logconnections: BPDBM CONNECT FROM 200.200.200.5.47668 TO 200.200.200.5.13721 fd = 10
14:26:24.528 [1498] <2> db_end: Need to collect reply
14:26:24.658 [1498] <2> launch: /usr/openv/netbackup/bin/admincmd/bpstsinfo, pid=3424
14:26:24.667 [1498] <2> listen_loop: do_schild = 1
14:26:24.667 [1498] <2> childterm: pid=3424 exit=0, signo=0 core=no
14:26:24.667 [1498] <2> schild: wait2() ECHILD
14:31:24.701 [1498] <2> get_behavior_rec: ?
14:31:24.701 [1498] <2> get_behavior_rec: MD5 digest line
14:31:24.701 [1498] <2> ConnectionCache::connectAndCache: Acquiring new connection for host netbackup, query type 98
14:31:24.702 [1498] <2> logconnections: BPDBM CONNECT FROM 200.200.200.5.47682 TO 200.200.200.5.13721 fd = 10
14:31:24.702 [1498] <2> db_end: Need to collect reply
14:31:24.834 [1498] <2> launch: /usr/openv/netbackup/bin/admincmd/bpstsinfo, pid=3631
14:31:24.842 [1498] <2> listen_loop: do_schild = 1
14:31:24.843 [1498] <2> childterm: pid=3631 exit=0, signo=0 core=no
14:31:24.843 [1498] <2> schild: wait2() ECHILD
bpdbm log :/usr/openv/netbackup/logs/bpdbm/log.042215
------------------------------------------------------------------------------------
14:28:30.638 [3508] <2> logconnections: BPDBM ACCEPT FROM 200.200.200.5.47675 TO 200.200.200.5.13721 fd = 10
14:28:30.644 [3508] <4> bpdbm: VERBOSE = 2
14:28:30.647 [3508] <2> db_logimagerec: protocol version 11 qtype 318 vers 0 client ? policy ?
14:28:30.647 [3508] <2> db_logimagerec: date1 04/22/15 14:13:30 (1429704810)
14:28:30.647 [3508] <2> db_logimagerec: date2 04/22/15 14:28:30 (1429705710)
14:28:30.647 [3508] <2> db_logimagerec: sched type ? (9)
14:28:30.647 [3508] <2> db_logimagerec: client type 5 ret level -1 elapsed 0 sec
14:28:30.647 [3508] <2> db_logimagerec: backup copy: Standard (0)
14:28:30.647 [3508] <2> image_db: Q_IMAGE_CATALOG_COLLECTION
14:28:30.667 [3508] <2> read_legacy_touch_file: Found /usr/openv/db/data/vxdbms.conf; requested from (vxdbms_conf.cpp.1528).
14:28:30.718 [3508] <2> DbmOdbcConnect::set_connection_id: -1 -> 2153
14:28:30.887 [3508] <2> process_request: request complete: exit status 227 no entity was found; query type: 318
14:28:30.908 [3509] <2> logconnections: BPDBM ACCEPT FROM 200.200.200.5.47676 TO 200.200.200.5.13721 fd = 10
14:28:30.913 [3509] <4> bpdbm: VERBOSE = 2
14:28:30.915 [3509] <2> db_logimagerec: protocol version 11 qtype 282 vers 0 client ? policy ?
14:28:30.915 [3509] <2> db_logimagerec: date2 04/22/15 14:28:30 (1429705710)
14:28:30.915 [3509] <2> db_logimagerec: sched type ? (9)
14:28:30.915 [3509] <2> db_logimagerec: client type 5 ret level -1 elapsed 0 sec
14:28:30.915 [3509] <2> db_logimagerec: options 0x8 compress 0 encrypt 0 Kbytes 0
14:28:30.915 [3509] <2> db_logimagerec: backup copy: Standard (0)
14:28:30.915 [3509] <2> db_logimagerec: image change log time 1429704810
14:28:30.915 [3509] <2> image_db: Q_IMAGE_CHANGELOG
14:28:30.932 [3509] <2> read_legacy_touch_file: Found /usr/openv/db/data/vxdbms.conf; requested from (vxdbms_conf.cpp.1528).
14:28:30.977 [3509] <2> DbmOdbcConnect::set_connection_id: -1 -> 2154
14:28:31.002 [3509] <2> process_request: request complete: exit status 227 no entity was found; query type: 282
14:30:27.188 [3588] <2> logconnections: BPDBM ACCEPT FROM 200.200.200.5.47679 TO 200.200.200.5.13721 fd = 10
14:30:27.194 [3588] <4> bpdbm: VERBOSE = 2
14:30:27.310 [3588] <2> process_request: request complete: exit status 0 ; query type: 91
14:30:27.332 [3589] <2> logconnections: BPDBM ACCEPT FROM 200.200.200.5.47680 TO 200.200.200.5.13721 fd = 10
14:30:27.338 [3589] <4> bpdbm: VERBOSE = 2
14:30:27.428 [3589] <2> process_request: request complete: exit status 0 ; query type: 91
14:31:24.713 [3630] <2> logconnections: BPDBM ACCEPT FROM 200.200.200.5.47682 TO 200.200.200.5.13721 fd = 10
14:31:24.719 [3630] <4> bpdbm: VERBOSE = 2
14:31:24.739 [3630] <2> process_request: request complete: exit status 0 ; query type: 98
BR
Deyaa
Good Morning,
I am upgrade my Backup Exec 2012 to Backup Exec 2014.
The Microsoft SQL Server upgrade may fail because the account security identifiers (SIDs) of the SQL service group accounts created during the Backup Exec SQL instance installation cannot be mapped to the SIDs currently assigned to the SQL service group accounts.
I found the article below
https://support.symantec.com/en_US/article.TECH216...
However, theCsolutionin this articlecan help me.
But, if I run the Backup Exec installation again, I will losemycurrent jobs???
Last week we upgraded our Master and Media servers to Netbackup 7.6.0.4 from 7.5.0.7 completing on the 17th April. Everything worked fine until 19th April when the we noticed Oracle and SQL backups were failing with an error 6 and an Exchange backup which normally takes 2.5 hours was still running after 2 days. Client servers are running a variety of versions from 7.1 to 7.5.0.7. We have two media servers and we only have this problem on one media server and the problem only affects some of the servers.
Error codes we are getting are 6, 41 and 196.
Investigating the problem the we found that the problem is the backups to the MSDP storage times out or is very slow in the case of the Exchange backup. Looking in the logs I have seen the following errors:
bptm
00:00:56.003 [7068.8068] <16> 86851:bptm:7068:hpwp-med01-bkp.hcuk.pri: [ERROR] PDVFS: pdvfs_lib_log: mtstrm_is_server_started: Cr_ErrnoException: Get Process Status command failed: Cr_ErrnoException: Timed out after waiting 1200s to send command Get Process Status to mtstrmd
00:00:56.003 [7068.8068] <16> 86851:bptm:7068:hpwp-med01-bkp.hcuk.pri: [ERROR] PDVFS: PdvfsMtstrmStartDaemon: The multi-threaded streaming daemon is not ready to receive requests even after 4 attempts. Check if mtstrmd is running and look for errors in mtstrmd.log.
00:00:56.003 [7068.8068] <16> 86851:bptm:7068:hpwp-med01-bkp.hcuk.pri: [ERROR] PDSTS: start_mtstrm_session: PdvfsMtstrmStartDaemon failed (18:Improper link)
00:30:28.676 [8116.13800] <16> 84077:bptm:8116:hpwp-med01-bkp.hcuk.pri: libsts openp() 15/04/21 00:30:28: stsm_open_module C:\Program Files\Veritas\NetBackup\bin\\ost-plugins\libstspizapi.dll failed err 2060053 platerr 193: LoadLibrary
dbclient
00:45:29.702 [11258] <16> readCommFile: ERR - timed out after 900 seconds while reading from /usr/openv/netbackup/logs/user_ops/dbext/logs/11258.0.1429572612
01:00:30.755 [11258] <16> readCommFile: ERR - timed out after 900 seconds while reading from /usr/openv/netbackup/logs/user_ops/dbext/logs/11258.0.1429572612
01:00:30.756 [11258] <32> serverResponse: ERR - could not read from comm file </usr/openv/netbackup/logs/user_ops/dbext/logs/11258.0.1429572612>
01:00:30.756 [11258] <16> CreateNewImage: ERR - serverResponse() failed
01:00:30.756 [11258] <16> VxBSACreateObject: ERR - Could not create new image with file /arch_ultq4t6kk_s17085_p1_t877566612.
bpdm
00:00:17.860 [900.10140] <16> 87153:bptm:900:hpwp-med01-bkp.hcuk.pri: libsts openp() 15/04/22 00:00:17: stsm_open_module C:\Program Files\Veritas\NetBackup\bin\\ost-plugins\libstspizapi.dll failed err 2060053 platerr 193: LoadLibrary failed
These errors seem to show the backups are unable to write to the storage as the backups seem to go to the media server ok and then fail because they cannot write to the storage. Apart from the upgrade the Netbackup configuration has not changed.
My gut feeling is that the failures are not caused by the upgrade and possibly not by Netbackup as these errors seem to be a consquence rather than a cause and we had at least a days worth of successful backups beform we started to have problems but as always for a Netbackup Administrator the problem is proving it.
Is anyone able give me any ideas? I've worked on this for 2 days and I am out of them.
I misconfigured my backups. I have it a full and then incremental jobs and my disk space is very low.
What I wanted to do was one full and then incremental.
So how do I delete the old job and free up the space and then go forward and redo my backups?
Hello everyone
Somebody can help me to check where is the reason about the status code. Last week we had to insert on the library 100 cartridges to minimize this kind of errors, but today I see the same error. Could be I don't have the enough STU, but I need to know if is this the reason. Which is the log to check this?
May be I have to organize my SLP's, someby have any idea about how can I do it?
As can you see, this are the messages about it:
22-abr-2015 5:00:59 - requesting resource LCM_media_server01-hcart-robot-tld-0
22-abr-2015 5:00:59 - granted resource LCM_media_server01-hcart-robot-tld-0
22-abr-2015 5:01:00 - begin Duplicate
22-abr-2015 5:01:00 - started process RUNCMD (pid=27132102)
22-abr-2015 5:01:01 - ended process 0 (pid=27132102)
22-abr-2015 5:01:01 - requesting resource media_server01-hcart-robot-tld-0
22-abr-2015 5:01:01 - requesting resource @aaaaj
22-abr-2015 5:01:01 - reserving resource @aaaaj
22-abr-2015 5:01:02 - end Duplicate; elapsed time 0:00:02
22-abr-2015 5:01:02 - Error nbjm (pid=25231436) NBU status: 96, EMM status: No media is available
22-abr-2015 5:01:02 - Error nbjm (pid=25231436) NBU status: 96, EMM status: No media is available
22-abr-2015 5:01:02 - Error nbjm (pid=25231436) NBU status: 96, EMM status: No media is available
unable to allocate new media for backup, storage unit has none available (96)
How would I configure the backup_exit_notify script to email me when certain clients have failed their backups and be able to filter the emails with respect to the policy names?
I was hoping someone could help with this issue. I am running Backup Exec 2014, with all updates, and I am trying to upgrade to 2015.
I recevied my upgrade email with my licenses. I import my license files with no issues, yet I don't get any option after that except to install the trial version.
I'm not sure why each show up twice either, I received 4 serial numbers in my license file.
Hi,
I am currently trying to plan an upgrade of our whole Netbackup environment which consists of the following:
A master server and 2 Netbackup 5220 appliances at one site (site A).
A master server and 2 Netbackup 5220 appliances at another site (site B).
All versions of Netbackup are 7.6.0.1 (or 2.6.0.1 for the appliances).
Both sites conduct their own backups for the clients at that site and then replicate the images to the other site via AIR (site A replicates to site B and vice versa).
I wish to upgrade the whole environment to 7.6.1.1 and was wondering the best way to do it whilst minimising downtime etc.
For example, can I upgrade site A one week and then site B the next week or will the appliances being on different versions for a week affect replications?
Any advice would be greatly appreciated. Many Thanks,
Ade
I experiencing an Incremental job fail for an SQL Server in Backup Exec 2014 after I added a backup job for the virtual machine (VMware) that run the sql server.
The incremental job fails for the following reason
Final error: 0xe0000363 - The Backup Exec SQL Agent was not used to create the last full, differential, or log backup of this database. You must use the SQL Agent to run a full backup before you can run a differential backup or transaction log backup.
In the job log results for the databases i find the following
V-79-57344-867 - The last Full backup of database dbname was not made by this application. Run a new Full backup, then run this job again.
I made few research on the forum and i found out that running the SQL Server backup (with SQL Agent) combined with the VMware Virtual Machine backup (vcenter type) and GRT enabled may break the incremental job for the SQL Server backup.
I verified this situation querying the msdb database on the SQL Server and i found that when the VMware backup job runs, it will write a new entry on that table (NULL; datatime) that break the SQL Agent Incremental job.
Here is the query i used (reference https://support.symantec.com/en_US/article.TECH58674.html):
select name, backup_start_date
from msdb..backupset dbo.backupset
where database_name = 'db_example'
order by backup_start_date desc
I tried disabling GRT on the Virtual Machine backup job but it seems not to make any effect, every time the vmware backup job runs, it makes a new record on the msdb..backupset table.
I believe my problem is the same reported by this user https://www-secure.symantec.com/connect/forums/vmware-vsphere-backup-grt-and-sql but the link suggested as possible solution (editing the quiescing file) is not more available.
How to fix this? Is there any solution to this problem?
Thank you.
Morning guys,
I have a question about the cmdlet "Get-BEBackupDefinition". When I use BEMCLI queries in some BE 2014 Servers, all jobs defined returned SDR is disabled. In some cases, it is false because checking the GUI, in each job, many jobs show the green light enabled "simplified Disaster Recovery: ON".
PS >> get-BEBackupDefinition | select name,simplifieddisasterrecoveryenabled
Name1 False
Name2 False
My question is if really the cmdlet "Get-BEBackupDefinition" filtering by simplifieddisasterrecoveryenabled shows a correct information and SDR is disabled or it is a bug,
Hi all,
can some one help me resolv that issue on MsSQL GUI?
I tryed to restore MsSQL Database en the GUI report the following : No backup SQL server object were found for client, in the specified timeframe
How can I resolve that issue
BR