Clik here to view.
SAP HANA Full Backups Show 0 Kilobytes Written and 0 Files Written
I need a solution The SAP Administrators states these backups run successfully, but i do not see how much data is being written. This isnt necessarily an issue, but could be if i can not judge the...
View ArticleClik here to view.
Running backups over a backup network for Backup Exec 2012
I need a solution We have created a backup network on our system to enable us to re-run backups during the day. Our VMs have 2 NICs with one on the live network and one on the backup network, this is...
View ArticleNDMP DEVICE CONFIGURATION
I need a solution Hi Champs,NBU 7.1SOLARISDATA ONTAP 8.0I have read the NDMP guide, and some link.http://www.symantec.com/business/support/index?pag... I need to configure tape drives with NDMP host...
View Articlepersistent tape drive bindings on Linux, multiple paths, etc.
I need a solution Hi,We have had LTO5 tape drives zoned into our RHEL media server for some time. It appears that the /dev/nstx paths change whenever the box is rebooted and causes confusion more than...
View ArticleSQL Server tape restore sitting at 0 bytes
I need a solution Hi, I have a new server here running windows server 2008 r2 with SQL server 2008 r2. Backup exec version r3 is installed.When I attempt to restore a database from tape to this...
View ArticleProblem with Symantec System Recovery
I need a solution Hi all, Our customer met a following issue. They deployed successfully the Symantec System Recovery on Windows 2008. It worked very well. But in a badly day, their server was failed...
View Articletransfer type in VMWARE backups.
I need a solution HiMaster Win 2012, 7.6.0.1 Media WIN 2012, 7.6.0.1 STU : MSDP Backup : FUll type client virtual machine RHEL6. Backup host : Media server it self which is virtual media server....
View ArticleSymantec Capacity Based Licensing
I need a solution Hi All, One of my client has around 14TB of raw data on the primary site and requires a back up;The backup is taken onto a VM; Please clarify if 14 licenses of Sym BE Capacity...
View ArticleJobs stuck in queued status BE2012 SP4
I need a solution HiWe are running Backup Exec 2012 SP4 with backup to disk (Hitachi HUS150 SAN) and duplicate to tape.Recently we have been unable to run any jobs, both backup and duplicates, because...
View ArticleNetBackup status code: 59
I need a solution Hi,How to resolve the following problem.NetBackup status code: 59Message: access to the client was not allowedMessage: access to the client was not allowed
View ArticleBE 12.5. Has not been backing up. can't repair or install SP4 to fix.
I need a solution I inhereted a system with BE 12.5. Windows 2003 server with SQL Server. Backups have not been ran for I don't know how long. I am totally lost. Last time I used Backup Exec it was a...
View ArticleBE2012 Convert to VM "VERY VERY SLOW" What CAUSE it???
I need a solution I m using vmware with BE2012 local store.I have setup clone my BE server itself after backup and convert to vm in a remote VM store ..on intranet BUT it is very very slow 100M/min.(...
View Articlenetbackup with data domians
I need a solution 1. we are using the netbackup windows servers (master, media & clients ) and we are using data domains.how to see the available space and used space in data domains.2. if...
View ArticleNDMP Tape Drive (SL8500 ACS) replaced
I need a solution Hi ExpertsWe have replaced drive of SL8500 T10000A. How should I replace drive on Netbackup Configured Media Server 6.5.6.http://www.symantec.com/business/support/index?pag...Above...
View ArticleIs it possible to Configure Backup Exec 2012 Appliance 3600 as a OpenStorage?
I do not need a solution (just sharing information) Hi guys!I need your help. I have here 2 Backup Exec 2012 servers:-BE1 - (Appliance 3600)-BE2 - Windows 2008 Stardard R2 I performed two Test...
View ArticleTLD(0) unavailable: initialization failed: Unable to open robotic path
I need a solution Hi Experts, I have a media server to which a HP auto loader is connected. It was working fine, but from past 2 days the robot initialization is failing.From the device manager of...
View ArticleNBU Upgrade preparation to 7.6
I need a solution Hi Fellow Forumers,We are planning to upgrade our NBU environment. Currently the version is 7.1 running on Redhat Linux. NBAC is also configured on their NBU. Now the scenario.We...
View ArticleImport Be tapes in netbackup
I need a solution Hello Experts ,Please advice can i import Baxkup Exe tape (Backup exe version from 11 to 2012) on Netbackup 7.6.0.1
View ArticleIm Backup-Speicher ist ein Lese-/Schreibfehler aufgetreten.
I need a solution Hallo ZusammenDa unser vorhergehender Admin die Firma relativ plötzlich verlassen musste, bin ich nun daran unser Backup zum laufen zu bringen. Ich hatte bereits einen Case bei...
View ArticleNBU Puredisk
I need a solution How to configure puredisk pls provide steps on windows servers
View Article