I need a solution
I used SSR2013 to move a disk image of SBS2003 to new hardware. However, I made a mistake creating the raid partition. The virtual drive is 3.6 TB, too big for Windows Server. However, I set the size of drive C: to 1.8 TB when restoring. So drive C: appears to be 1.8 TB and everything works except SSR2013 which reports out of memory and will not backup drive C:. The problem seems to be reported in PartInfo text file as "WARNING: Partition above extends beyond the end of disk".
Can I do anything to fix the partition table? Because of the error, I cannot image the server and so I can't recreate the partition.
=========================================================================================================================
Disk Geometry Information for Disk 0 Sector Count: 3,513,622,528 (486,062 Cylinders, 255 Heads, 63 Sectors/Track)
Signature: 97F797F7
Detected Sector Size: 512
Detected Alignment: 1 MB
.........................................................................................................................
System Part Table LBA # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
=========================================================================================================================
C:\
On Disk Values: 0 0 80 0 32 33 07 1023 254 63 2,048 3,712,587,776
Calculated: 0 32 33 231098 7 13
WARNING: Partition above extends beyond the end of disk.
====================================================================================================================
Partition Information for Disk 0: 1.64 TB
Volume Path PartitionType Status Size Part Table Lba # Start Sector Total Sectors
====================================================================================================================
Unallocated Pri 1 MB None -- 0 2,048
C:\ NTFS Pri,Boot 1.73 TB 0 0 2,048 3,712,587,776