Hello everyone,
I've noticed that every time i try to restore a folder or file to a different location i get the messages below.
10/1/2015 4:27:13 PM - Info bpbrm(pid=4880) connect failed STATUS (18) CONNECT_FAILED
10/1/2015 4:27:13 PM - Info bpbrm(pid=4880) status: FAILED, (42) CONNECT_REFUSED; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO tmeserver 10.233.120.68 bpcd VIA pbx
10/1/2015 4:27:13 PM - Info bpbrm(pid=4880) status: FAILED, (42) CONNECT_REFUSED; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO tmeserver 10.233.120.68 bpcd VIA vnetd
10/1/2015 4:27:13 PM - Info bpbrm(pid=4880) status: FAILED, (42) CONNECT_REFUSED; system: (10061) No connection could be made because the target machine actively refused it. ; FROM 0.0.0.0 TO tmeserver 10.233.120.68 bpcd
10/1/2015 4:27:13 PM - Error bpbrm(pid=4880) Cannot connect to tmeserver
10/1/2015 4:27:13 PM - Info tar32(pid=0) done. status: 58: can't connect to client
10/1/2015 4:27:13 PM - Error bpbrm(pid=4880) client restore EXIT STATUS 58: can't connect to client
10/1/2015 4:38:48 PM - restored image TMESERVER_1442535009 - (cannot connect on socket(25)); restore time 0:12:31
10/1/2015 4:38:49 PM - end Restore; elapsed time: 0:12:34
Standard policy restore error(2800)
The only way i've been able to get around this is by restoring the folders/files to the local drive on the backup server.
I then map a drive to the proper server and copy the folders/files over.
It also works if i restore to the original location.
I tried putting the server name and ip address on the local host file of the backup server.
Any advise would be greatly appreciated.
Thank you,