Hello friends,
I need help in troubleshotting the issue of MSL4048 on solaris 10
only one chnager and drive is visible and second drive is not detecting.
Kindly help
bash-3.2# sgscan
/dev/sg/c0t0l0: Disk (/dev/rdsk/c0t0d0): "HP LOGICAL VOLUME"
/dev/sg/c0t1l0: Disk (/dev/rdsk/c0t1d0): "HP LOGICAL VOLUME"
/dev/sg/c0tw5001438016025bfal0: Tape (/dev/rmt/0): "HP Ultrium 4-SCSI"
/dev/sg/c0tw5001438016025bfal1: Changer: "HP MSL G3 Series"
bash-3.2# ./tpconfig -d
Id DriveName Type Residence
Drive Path Status
****************************************************************************
0 HP.ULTRIUM4-SCSI.000 hcart TLD(0) DRIVE=1
/dev/rmt/0cbn UP
Currently defined robotics are:
TLD(0) robotic path = /dev/sg/c0tw5001438016025bfal1
EMM Server = khombs1bl
bash-3.2# vmoprcmd
HOST STATUS
Host Name Version Host Status
========================================= ======= ===========
khombs1bl 750400 ACTIVE
PENDING REQUESTS
<NONE>
DRIVE STATUS
Drive Name Label Ready RecMID ExtMID Wr.Enbl. Type
Host DrivePath Status
=============================================================================
HP.ULTRIUM4-SCSI.000 No No No hcart
khombs1bl /dev/rmt/0cbn TLD
only one drive as shown above. How to detect second drive
At solaris level :-->
bash-3.2# iostat -En | grep -i rmt
rmt/0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
bash-3.2#
bash-3.2# cfgadm -al | grep -i tape
c1::5001438016025bfa tape connected configured unknown
bash-3.2#
It looks loke second drive is not getting detetcted at OS level...
How to move forward ?
Regards
S.