Hi Guys,
I recently changed my tape drives from LTO5 to LTO6 and ever since then I am facing issues with backing up the NDMP filer data, I initially had selected to backup the entire volume and when I back up the informtion it fails somewhere in the middle with
==========================
02/01/2015 21:12:33 - Info ndmpagent(pid=7832) iaesha1501: DUMP: Tape write failed.
02/01/2015 21:12:33 - Info ndmpagent(pid=7832) iaesha1501: DUMP: DUMP IS ABORTED
02/01/2015 21:12:36 - Info ndmpagent(pid=7832) iaesha1501: DUMP: Deleting "/vol/Replicated/../snapshot_for_backup.27" snapshot.
02/01/2015 21:12:37 - Error ndmpagent(pid=7832) iaesha1501: DATA: Operation terminated: EVENT: I/O ERROR (for /vol/Replicated/)
02/01/2015 21:12:37 - Error ndmpagent(pid=7832) NDMP backup failed, path = /vol/Replicated/
02/01/2015 21:12:37 - Error bptm(pid=8108) none of the NDMP backups for client iaesha1501 completed successfully
02/01/2015 21:13:39 - Info bptm(pid=8108) EXITING with status 99 <----------
02/01/2015 21:13:39 - Info ndmpagent(pid=0) done. status: 99: NDMP backup failure
02/01/2015 21:13:39 - end writing; write time: 5:57:18
NDMP backup failure(99)
===========================
So I decided the break the backup into chunks and backup each folder in a separate job so now I get this message.
=============================
05/01/2015 14:57:17 - Info ndmpagent(pid=10460) iaesha1502: ENHANCED_DAR_ENABLED is 'T'
05/01/2015 14:57:17 - Info ndmpagent(pid=10460) iaesha1502: ACL_START is '731361428480'
05/01/2015 14:57:23 - Info ndmpagent(pid=10460) iaesha1502: DUMP: dumping (Pass V) [ACLs]
05/01/2015 14:57:23 - Info ndmpagent(pid=10460) iaesha1502: DUMP: 714224243 KB
05/01/2015 14:57:23 - Info ndmpagent(pid=10460) iaesha1502: DUMP: DUMP IS DONE
05/01/2015 14:57:24 - Info ndmpagent(pid=10460) iaesha1502: DUMP: Deleting "/vol/Replicated/../snapshot_for_backup.29" snapshot.
05/01/2015 14:57:26 - Info ndmpagent(pid=10460) NDMP backup successfully completed, path = /vol/Replicated/Organisation
05/01/2015 14:57:26 - Info ndmpagent(pid=10460) 1934523 entries sent to bpdbm
05/01/2015 14:57:38 - Info bptm(pid=8840) EXITING with status 23 <----------
05/01/2015 14:57:38 - Critical bpbrm(pid=11040) unexpected termination of client iaesha1502
05/01/2015 14:57:38 - Info ndmpagent(pid=0) done. status: 23: socket read failed
05/01/2015 14:57:38 - end writing; write time: 2:32:31
socket read failed(23)
=============================
It looks like from the above message tht the data backup is complete and at the end it errors out?
Thanks
A