Hello Every body, I have a situation where tpconfig -l / -d command show me the whole robots i have attached to a master server, but when i run the robtest command it shows only two of the three robots attached.
I have reinstalled the sg.drivers lots of times and restarted the netbackup services bit it continues showing only two. Also I have used the command tldtest -r /path of fobot and it works.
What i am doing grong.....
this is the output ot the commands.
Device Robot Drive Robot Drive Device Second
Type Num Index Type DrNum Status Comment Name Path Device Path
robot 0 - TLD - - - - /dev/sg/c0tw500104f000ba6017l0
drive - 1 hcart 2 UP - IBM.ULTRIUM-TD4.004 /dev/rmt/0cbn
drive - 2 hcart 3 UP - IBM.ULTRIUM-TD4.005 /dev/rmt/9cbn
drive - 3 hcart 4 UP - IBM.ULTRIUM-TD4.006 /dev/rmt/1cbn
drive - 4 hcart 5 UP - IBM.ULTRIUM-TD4.007 /dev/rmt/10cbn
drive - 5 hcart 6 UP - IBM.ULTRIUM-TD4.008 /dev/rmt/2cbn
drive - 6 dlt 8 UP - QUANTUM.SDLT600.000 /dev/rmt/4cbn
drive - 11 hcart 1 UP - IBM.ULTRIUM-TD4.010 /dev/rmt/8cbn
robot 1 - TLD - - - - /dev/sg/c0tw2101000d779ae30fl0
drive - 0 hcart 1 UP - IBM.ULTRIUM-TD4.000 /dev/rmt/23cbn
drive - 12 hcart 10 UP - IBM.ULTRIUM-TD4.015 /dev/rmt/14cbn
drive - 13 hcart 11 UP - IBM.ULTRIUM-TD4.018 /dev/rmt/13cbn
drive - 14 hcart 12 UP - IBM.ULTRIUM-TD4.017 /dev/rmt/12cbn
drive - 15 hcart 13 UP - IBM.ULTRIUM-TD4.016 /dev/rmt/11cbn
drive - 16 hcart 2 UP - IBM.ULTRIUM-TD4.001 /dev/rmt/22cbn
drive - 17 hcart 3 UP - IBM.ULTRIUM-TD4.002 /dev/rmt/21cbn
drive - 18 hcart 4 UP - IBM.ULTRIUM-TD4.003 /dev/rmt/20cbn
drive - 19 hcart 5 UP - IBM.ULTRIUM-TD4.009 /dev/rmt/19cbn
drive - 20 hcart 6 UP - IBM.ULTRIUM-TD4.011 /dev/rmt/18cbn
drive - 21 hcart 7 UP - IBM.ULTRIUM-TD4.012 /dev/rmt/17cbn
drive - 22 hcart 8 UP - IBM.ULTRIUM-TD4.013 /dev/rmt/16cbn
drive - 23 hcart 9 UP - IBM.ULTRIUM-TD4.014 /dev/rmt/15cbn
robot 2 - TLD - - - - /dev/sg/c0tw500104f000cd8583l1
drive - 7 hcart2 1 UP - HP.ULTRIUM5-SCSI.000 /dev/rmt/5cbn
drive - 8 hcart2 2 UP - HP.ULTRIUM5-SCSI.001 /dev/rmt/3cbn
drive - 9 hcart2 3 UP - HP.ULTRIUM5-SCSI.002 /dev/rmt/6cbn
drive - 10 hcart2 4 UP - HP.ULTRIUM5-SCSI.003 /dev/rmt/7cbn
root@nbu:/usr/openv/volmgr/bin/driver# robtest
Configured robots with local control supporting test utilities:
TLD(0) robotic path = /dev/sg/c0tw500104f000ba6017l0
TLD(1) robotic path = /dev/sg/c0tw2101000d779ae30fl0
Robot Selection
---------------
1) TLD 0
2) TLD 1
3) none/quit
root@nbu:/usr/openv/volmgr/bin/driver# tldtest -r /dev/sg/c0tw500104f000cd8583l1
Opening /dev/sg/c0tw500104f000cd8583l1
MODE_SENSE complete
Enter tld commands (? returns help information)
s d
drive 1 (addr 500) access = 1 Contains Cartridge = no
drive 2 (addr 501) access = 1 Contains Cartridge = no
drive 3 (addr 502) access = 1 Contains Cartridge = no
drive 4 (addr 503) access = 1 Contains Cartridge = no
READ_ELEMENT_STATUS complete